Clive is an established west-side suburb with limited new inventory coming to market. Homeowners here are staying put and investing in the space they already have.
Busy Builders frames, insulates, wires, and finishes Clive basements from the ground up, converting unused square footage into livable space built to code and built to last.
Written scope, fixed estimate, and zero surprise charges before a single wall goes up.
Since 2020, Busy Builders has completed over 400 basement finishing projects across Central Iowa, including homes right here in Clive. We built this company on one principle: tell homeowners exactly what their project needs, price it honestly, and do the work right the first time.
Clive homeowners invest in high-finish basement projects because they plan to stay. We help you build a space that holds up, appraises well, and gets used every single day.
Every Clive basement finishing project starts with a full assessment before any scope is written. We check for radon, moisture, ceiling height, structural walls, rough-in locations, and permit requirements first.
Then we give you a written plan, a fixed price, and a realistic timeline. We do not start work until you have signed off on every detail.
A finished basement your family uses for the next 20 years is the only outcome we are working toward.
We want to be the registered general contractor that Clive homeowners call first for basement finishing and recommend to their neighbors without hesitation.
Every project we finish in Clive, West Des Moines, Johnston, and across Central Iowa is a chance to earn that reputation one basement at a time.
Every basement finishing project in Clive starts with moisture control. Central Iowa’s clay soil holds groundwater against foundation walls under constant lateral pressure, and 71.6% of Iowa homes test above the EPA action level for radon according to Iowa HHS data.
Before we frame a single wall, we inspect for cracks, efflorescence, sump pump performance, and window well drainage throughout your basement. We seal foundation walls, install vapor barriers where needed, and confirm your sump pump is handling the load.
Addressing moisture before framing adds $1,500 to $5,000 on most projects and protects every dollar you spend after it. Finding moisture after drywall is up costs $3,000 to $15,000 more to fix. We check first, every time. Learn what to fix before finishing your Iowa basement before any scope is written.
Iowa’s building code requires at least one emergency escape and rescue opening in every basement and in each basement sleeping room. Under the 2015 IRC as adopted in Iowa, that opening must provide a minimum net clear opening of 5.7 square feet, a minimum clear height of 24 inches, a minimum clear width of 20 inches, and a maximum sill height of 44 inches above the finished floor.
A basement bedroom without a code-compliant egress window cannot be appraised or marketed as a bedroom at resale. This is one of the most common and costly code violations uncovered during Clive home sales. Clive has a solid stock of 1980s through early 2000s homes where owners planned to add a bedroom below grade and never addressed the egress requirement.
We cut into the foundation, install a code-compliant window and window well with proper drainage, and handle all permit filings and inspections. Egress window installation runs $2,500 to $5,000 per opening, including excavation and the well. We include this in the scope of every project with a planned bedroom below grade.
The International Residential Code sets the national standard that Iowa follows for egress window requirements. Your local Clive building official confirms compliance during inspection.
Framing is where your Clive basement floor plan takes shape. We use pressure-treated lumber on every piece of wood that contacts concrete, because Iowa’s humidity causes untreated lumber to rot within a few years in a below-grade environment.
Our crew frames bedrooms, bathrooms, closets, and open living areas according to your approved layout. We also build soffits and chases to conceal ductwork, pipes, and beams so your finished basement has clean sight lines throughout.
Clive homes built in the 1980s and 1990s frequently have ceiling heights right at the 7-foot minimum required for habitable spaces under Iowa code. We measure every basement before framing begins to confirm what can legally be built in your space.
Adding a bathroom, wet bar, or laundry area to your Clive basement means running new plumbing lines. We do this work while the walls are open because it is the fastest and least expensive time to route supply and drain pipes.
If your basement has no existing plumbing rough-ins, slab trenching is required to install drain lines below the concrete floor. Slab trenching adds $8,000 to $15,000 to a project. A full bathroom with slab trenching runs $20,000 to $50,000 depending on fixtures and finishes.
We pull all required permits and schedule inspections so your project stays code-compliant from the first day of work. Our licensed plumbers hold separate state licenses as required under Iowa law. Estimates vary by project scope and existing rough-in availability. For a look at what a bathroom adds to the budget, see what a basement bathroom really costs in Central Iowa.
Every basement finishing project in Clive needs a solid electrical plan. We map every outlet, switch, circuit, and lighting fixture while your walls are still open. Iowa follows the NEC 2023 with state-specific amendments under Iowa Administrative Code 481-404.
Iowa’s amended Article 210.8(A)(5) requires GFCI protection on every 125-volt, 15- and 20-ampere receptacle in your basement, finished or unfinished. That applies to every standard outlet in the space, not just outlets near water. Iowa also requires GFCI protection on sump pumps, dishwashers, and microwave ovens under its amended Article 210.8(D), which goes beyond the base NEC 2023 standard.
Clive homes from the 1980s and 1990s sometimes need a panel upgrade before a basement finish can begin. We assess your panel capacity at the walkthrough so there are no surprises mid-project.
We also wire for future use. If a home theater, dedicated office circuit, or workshop outlet is on your list down the road, we run the wiring now so you do not have to open walls later. Costs vary by room count, circuit needs, and scope. For a complete look at budget drivers, see the full cost breakdown for finishing a basement in Des Moines.
Before we run a single vent, we check whether your current HVAC system can handle the added square footage. A finished basement in Clive can add 500 to 1,500 square feet to your home’s heating and cooling load. If your system is already working near capacity, pushing more air to the basement means less comfort on the main floor.
We perform a load calculation to find out if your existing system covers the new space or if you need a supplemental unit, an upgrade, or zoned controls. Then we extend ductwork and add supply and return registers in every new room.
Iowa basements sit below the frost line at 42 to 48 inches, so they naturally stay cooler in summer and hold heat well in winter. Proper ventilation prevents the musty conditions that shorten the life of flooring, drywall, and cabinetry in a below-grade space. We also install bathroom exhaust fans and balance airflow across your whole home so every level stays comfortable year-round.
Proper insulation makes your finished Clive basement comfortable year-round and protects your investment from Iowa’s moisture conditions. Iowa’s residential energy code requires basement wall insulation based on the climate zone applicable to your project location. Clive sits in Iowa Climate Zone 5A, which sets the minimum R-value requirements for foundation walls.
We specify closed-cell spray foam or rigid foam board on every foundation wall in Central Iowa basements. Fiberglass batt insulation pressed directly against a concrete foundation wall absorbs ground moisture, promotes mold, and fails within a few years. It is not the right material for Iowa below-grade walls. Closed-cell foam and rigid board create the thermal and moisture barrier the wall requires.
Standard fiberglass batt insulation is appropriate for interior partition walls only, where it is not in contact with concrete. We specify the right material for every surface on every project, with no shortcuts. For more on insulation choices and their long-term impact, see our guidance on insulation upgrades for Iowa basements. Costs vary by basement size, wall condition, and insulation type selected.
Drywall turns your framed Clive basement into real, finished rooms. We hang, tape, mud, and sand every surface to a smooth, paint-ready finish.
In bathrooms and areas near water sources, we use moisture-resistant drywall to prevent mold and long-term damage. For ceilings, you can choose between drywall for a clean, seamless look or a drop ceiling that keeps plumbing and electrical accessible above , useful in Clive’s established homes where mechanical systems often run low across the ceiling.
Iowa’s residential building code, adopted under Iowa Administrative Code 481-301.8, requires a minimum 7-foot ceiling height for all habitable basement spaces. Bathrooms are allowed at 6 feet 8 inches. Beams, ducts, and other obstructions may drop to 6 feet 4 inches in non-habitable areas. In Clive homes built throughout the 1980s, 1990s, and 2000s, we plan every ceiling layout around these clearances to give you the most usable height in every room.
We paint basement walls and ceilings before the new floors go in. This keeps drips, dust, and overspray off your finished flooring and speeds up the final phase.
Clive basements need a moisture-resistant primer coat and high-quality, low-VOC paint rated for below-grade spaces. Light, neutral colors help reflect limited natural light and make rooms feel larger. We work with you to choose colors that connect your finished basement to the rest of your home’s style.
Basement floors sit on a concrete slab, so not every flooring material holds up well below grade. Iowa’s temperature swings and seasonal humidity changes make this especially important in Clive homes, where many basements were built in the 1980s through 2000s and have seen decades of seasonal moisture cycling.
Luxury vinyl plank is the standard recommendation for Iowa basements. It handles moisture-level variations without gapping, cupping, or retaining allergens. Porcelain tile and engineered hardwood are also solid options depending on scope and budget. We install a subfloor system when needed to add warmth, cushion, and a moisture barrier between your new floor and the concrete. For more on choosing the right material, read about Iowa flooring options: LVP, hardwood, or tile for basements. Basement flooring typically runs $3 to $12 per square foot installed. Costs vary by project, material, and scope.
Clive basements have little to no natural light. A smart lighting plan is what makes yours feel like a real part of your home instead of an afterthought.
We install recessed LED can lights for even, energy-efficient coverage throughout the space. Task lighting goes in work areas and home offices. Accent lighting adds atmosphere in entertainment spaces and wet bars. Dimmer switches and smart controls let you adjust the mood for movie night, game day, or everyday use. We plan lighting room by room based on ceiling height, layout, and how you plan to use each space.
This is where your Clive basement becomes something your family actually uses every day. Busy Builders designs and builds custom features that fit your layout and your lifestyle.
We build wet bars, entertainment centers, built-in shelving, dedicated home offices, and storage systems. Want a home gym, craft area, or kids’ play space? We build it to fit your basement’s footprint and your family’s needs. Every custom feature matches the look and feel of the finished space above it. Clive homeowners investing in high-finish basements to stay long-term often prioritize built-ins and multi-use zones that grow with the family. For layout ideas before you commit, see best basement layouts for Iowa homes in 2026.
Final finishes bring your entire Clive basement project together. We install baseboards, door casings, trim, and all final hardware. Cabinet pulls, outlet covers, light switch plates, and towel bars go in last.
Then we do a detailed walkthrough with you to check every corner, every switch, and every surface. We do not consider the project complete until you are satisfied with every detail. Most basement finishing projects in Clive run 6 to 12 weeks from permit to this final step, depending on scope and whether a bathroom is included.
Since 2020, Busy Builders has completed 1,285+ projects across Central Iowa, earning a 99% satisfaction rate. Clive homeowners trust us to turn unfinished square footage into livable, code-compliant space, with a written scope and fixed estimate before work ever begins.
Most basement finishing projects in Clive take 6 to 10 weeks from permit to final walkthrough. A basic family room in a clean, dry basement runs closer to 6 weeks. A full guest suite with a bathroom and egress window installation runs 10 to 16 weeks.
We give you a written timeline before work begins so you know exactly what to expect at every phase. Clive permit timelines through the city’s building department are factored into your schedule from day one. Learn more about basement finishing permit requirements and how they affect your costs.
Yes, virtually every basement finishing scope in Clive requires permits. New electrical circuits, plumbing installation, HVAC modifications, structural framing, and conversion to bedrooms or bathrooms all trigger permit requirements under local building codes.
Busy Builders handles every permit application and inspection coordination for you. An unpermitted basement bedroom cannot be marketed as a bedroom at resale, creates insurance complications, and triggers disclosure obligations that cost far more than the permit itself. We pull every required permit on every project, without exception. You can verify our active registration at Iowa DIAL before signing anything.
Basement finishing in Clive typically costs between $35,000 and $90,000 or more, depending on size and scope. A basic 800 sqft family room runs $28,000 to $36,000. A full bedroom-and-bath suite runs $50,000 to $75,000. Mid-range projects on a 1,000 sqft basement run $35,000 to $65,000.
Clive homeowners tend to invest in mid-range to high-end finishes, since most are staying long-term in an established market with limited new inventory. Bathrooms, egress windows, and moisture remediation are the three biggest budget drivers. None are optional when they are needed. Always budget a 15 to 20 percent contingency. For a full breakdown, read about basement finishing costs in Des Moines in 2026. Costs vary by scope, materials, and complexity. Busy Builders provides a written, itemized estimate after a full walkthrough, before any work begins.
Every Busy Builders project in Clive starts with a full moisture check before a single wall is framed. Central Iowa’s expansive clay soil holds water against foundation walls under constant lateral pressure. We check for wall cracks, efflorescence, sump pump performance, and window well drainage before framing begins.
Moisture found after drywall is installed costs $3,000 to $15,000 more to address than catching it first. We also specify closed-cell spray foam or rigid foam board insulation against all foundation walls. Fiberglass batt insulation pressed against concrete absorbs moisture, promotes mold, and fails within years. That specification is never acceptable on a Busy Builders project. Learn more about what to fix before finishing your Iowa basement.
A finished basement in Clive adds real, usable square footage that buyers in this market actively seek. Clive’s established west-side character means limited new inventory, and buyers comparing homes here often pass on unfinished lower levels entirely. Finishing your basement is one of the most direct ways to stay competitive in this market without moving.
Since 2022, Fannie Mae requires appraisers to use the ANSI Z765-2021 standard, which excludes below-grade square footage from gross living area calculations. Finished basement space typically receives 50 to 70 percent of above-grade per-square-foot credit. Plan for 60 to 75 percent ROI at resale, plus years of daily use. Read more about how appraisers really value finished basements in Iowa before finalizing your scope.
For most Clive homeowners with a functional unfinished basement, finishing that space is the right first move. It costs $35,000 to $90,000 and returns 60 to 75 percent at resale. A home addition costs $100,000 to $200,000 or more and returns 30 to 35 percent at resale, but provides full above-grade gross living area that counts directly in appraisals.
If your basement is already partially finished but needs to be fully rebuilt or reconfigured, see our basement remodeling for existing finished spaces service instead. For homeowners weighing both options, we put together a detailed guide on finished basement vs. home addition, which is the better investment in Des Moines. Busy Builders gives a straight assessment at the consultation, including when an addition is actually the right call.
Picking basement insulation in Iowa is not really a fiberglass-versus-spray-foam debate. It is a moisture physics problem, and the Iowa climate makes the answer clearer than homeowners expect. This...
Online basement bar and entertainment room prices range from $1,000 to over $125,000, which is useless for homeowners planning a real Central Iowa project. This guide breaks down 2026...
Choosing between finishing your basement and building a home addition is one of the biggest decisions Central Iowa homeowners face. Both options create more living space, but the right...
