Kitchen Remodeling
Nevada, IA

Nevada kitchens carry their age. Closed-off layouts, undersized electrical panels, and exhaust fans venting into attics instead of outside are standard findings in pre-1990 Story County homes. These issues affect how you cook, how your kitchen feels, and how much your home is worth.

Busy Builders remodels kitchens across Nevada, from cosmetic refreshes that update finishes without moving walls to full gut remodels that open the floor plan and bring the electrical service into the modern era. We handle structural changes, permit coordination, and hidden-condition discovery before demo ever begins.

Satisfaction Rate

40 %

Completed Projects

1155 +

Nevada, IA Kitchen
Remodeling Services

Why Nevada
Homeowners Choose Us

Since 2020, Busy Builders has completed 1,285+ construction and remodeling projects across Central Iowa, including kitchen remodels throughout Story County and the surrounding region. Nevada’s housing stock presents specific challenges that require upfront assessment, not mid-project discovery.

Pre-1990 homes in Nevada regularly carry 60-to-100-amp electrical panels that cannot support a modern kitchen’s circuit load. A refrigerator, dishwasher, and disposal each need a dedicated 20-amp circuit under Iowa’s adopted NEC 2023 standards.

Our Approach

We give Nevada homeowners a clear written scope before any demo begins. That includes an honest assessment of what older Story County homes typically hide, a recommended 15-to-20% contingency for conditions like corroded galvanized supply lines or water-damaged subfloor, and pricing that does not shift after you sign.

Why Nevada Homeowners Choose Busy Builders

We want to be the registered contractor that Nevada homeowners trust with their most-used room. From kitchen remodeling across Central Iowa to structural wall removal in older Story County homes, we bring transparent pricing, honest timelines, and a full pre-demo assessment to every Nevada kitchen project.

How We Remodel Nevada Kitchens

Step #1

ASSESSMENT & PLANNING

Before any demo begins, we walk through your Nevada kitchen and assess what stays and what goes.

We check your electrical panel capacity, plumbing supply lines, exhaust fan routing, subfloor condition, and whether any walls are load-bearing. In pre-1990 Nevada homes, we routinely find 60 to 100 amp panels, corroded galvanized supply lines, and exhaust fans venting into attics instead of the exterior. These are correctable, but they affect your budget and timeline. We identify them before a single cabinet comes down, not after.

We also note radon risk. Iowa is the only state where every county sits in EPA Radon Zone 1. Any remodel that opens walls in a Nevada home should be followed by a radon retest.

Step #2

PERMITS & APPROVALS

Kitchen remodeling in Nevada, IA requires permits for structural changes, new electrical circuits, plumbing relocations, and HVAC modifications. Iowa contractor registration is administered through Iowa DIAL under Iowa Administrative Code agency 481. Nevada falls under Story County jurisdiction, and permit applications for work requiring structural or mechanical changes must be submitted before any demo begins. Under Iowa’s adopted NEC 2023 amendments, all countertop outlets require GFCI protection and kitchen branch circuits in new work require AFCI protection. Busy Builders handles every permit application for Nevada homeowners from start to finish, so nothing gets missed before the first tool hits the wall.

Step #3

DEMO & HAZARD REMEDIATION

Demo is where Nevada kitchens reveal what Iowa’s humidity and aging infrastructure have been hiding. Pre-1990 homes in Nevada regularly surface water-damaged subfloor under the sink and dishwasher, corroded galvanized supply lines, exhaust fans ducted into attics instead of the exterior, and asbestos floor tile beneath existing flooring. These are correctable conditions, but they add cost and time. That is exactly why we build a 15 to 20 percent contingency into every Nevada estimate and identify as many of these issues as possible during the assessment phase, before a single cabinet comes off the wall.

Step #4

STRUCTURAL CHANGES & FRAMING

Open-concept conversions are the most-requested structural change in Nevada kitchen remodels. Homes built in the 1970s and 1980s throughout Story County typically feature closed layouts that wall off the kitchen from the dining and living areas. Those layouts no longer match how households actually cook, gather, and move through a home. Removing those walls requires a structural assessment before any demo begins.

Load-bearing walls, which are the walls that hold up the house above, require engineered headers and stamped structural drawings submitted with the permit application. Our team coordinates directly with a structural engineer on every wall-removal project in Nevada. We identify load-bearing conditions during the Phase 1 assessment, so your written estimate already accounts for header sizing and framing scope.

Step #5

PLUMBING ROUGH-IN

Moving the sink, adding a prep sink, relocating the dishwasher drain, or running a refrigerator water line all happen while walls and floors are open in your Nevada kitchen.

This is the lowest-cost window to change plumbing locations. Once walls close, the same changes cost significantly more and add days to the schedule. Many pre-1990 Nevada homes still have corroded galvanized supply lines that need full replacement before any new fixtures go in. Our team identifies these conditions during the full kitchen assessment, not after demo starts. Plumbing rough-in typically runs 5-10% of your total budget, rising if the layout shifts the sink to a new location.

Step #6

ELECTRICAL ROUGH-IN

Electrical rough-in covers new circuits, outlet placement, under-cabinet lighting wiring, pendant fixture rough-in, exhaust fan wiring, and dedicated appliance circuits for the refrigerator, dishwasher, range, and microwave.

Under Iowa NEC 2023 with state amendments, GFCI protection is required on all 125-volt, 15- and 20-amp countertop outlets. AFCI protection is required on all kitchen branch circuits in new work. Nevada’s older housing stock adds another layer to this phase. Homes built before 1990 commonly run 60-100 amp service panels. Modern kitchens need 150-200 amps. A panel upgrade adds $3,000-$8,000 and extends the timeline two to three weeks. We flag panel capacity at assessment so it appears in your written estimate, not as a surprise mid-project.

Step #7

VENTILATION & RANGE HOOD ROUGH-IN

Range hood ventilation is one of the most commonly done wrong details in Nevada kitchen remodels.

Iowa adopted NEC 2023 and requires all range hoods and exhaust fans to vent directly to the exterior. Venting into attic cavities is a code violation, and it is surprisingly common in Nevada’s pre-1990 housing stock. Attic-vented exhaust fans trap moisture, accelerate sheathing rot, and create conditions for mold growth. They also fail Iowa’s inspection requirements, which means any remodel that touches exhaust routing will need a correction before final sign-off.

We identify exhaust routing during Phase 1 assessment, before a single cabinet is ordered. If rerouting is required, we build it into the written scope and estimate upfront. Nevada homeowners get a clear picture of what the correction costs before the project starts, not after demo reveals the problem.

Step #8

DRYWALL & CEILINGS

Drywall goes up after all mechanical inspections are passed in your Nevada kitchen.

We hang, tape, mud, and sand every surface to a smooth, paint-ready finish. Moisture-resistant drywall goes on all kitchen walls, particularly behind the backsplash area and above the sink. Nevada kitchens see real humidity swings between Iowa summers and dry winter heating seasons, and standard drywall behind those surfaces absorbs that moisture over time. Using the right material from the start prevents bubbling, soft spots, and premature failure.

If a load-bearing wall came down during structural work, ceiling repairs and new drywall transitions are handled as part of this same phase.

Step #9

CABINET INSTALLATION

Cabinets go in after drywall is complete and walls are primed in your Nevada kitchen.

Upper cabinets are hung first, then base cabinets are set and leveled across the floor. Every cabinet is secured to studs with proper fasteners. Iowa’s humidity swings cause wood to move seasonally, and we account for that during installation by choosing plywood box construction over particle board wherever possible. Particle board absorbs moisture and swells, especially in Nevada homes where kitchen humidity fluctuates significantly between summer and winter. Plywood holds its shape and its fasteners far longer in Central Iowa conditions.

Cabinet lead times run 4 to 12 weeks depending on the product line.

Step #10

COUNTERTOPS, BACKSPLASH & SINK

Countertop templating happens only after cabinets are fully installed and leveled. In Nevada kitchens, quartz is the most common choice. It handles Iowa’s humidity swings and freeze-thaw cycles without sealing or special maintenance, which matters in a climate that pushes moisture levels high in summer and drops humidity sharply in winter.

Quartz and granite slabs are fabricated to the template, then installed with proper support and adhesive. Undermount sinks are set before the countertop is secured. Backsplash tile goes in after countertops are set and cured. Fabrication typically takes one to two weeks after templating. This step is part of the timeline, not a pause. Homeowners in Nevada’s older housing stock should know that a full kitchen remodeling assessment includes checking the subfloor and rough plumbing before countertop work begins, since corroded galvanized supply lines are common in pre-1990 Story County homes and are far easier to address before the new sink drops in.

Step #11

APPLIANCES, FIXTURES & HARDWARE

Appliances are delivered and installed after countertops and backsplash are complete. This sequencing protects finished surfaces from delivery damage, which matters when countertop and tile work represents a significant share of a mid-range Nevada kitchen remodel budget.

Refrigerator, range, dishwasher, and disposal are connected, tested, and confirmed operational before the project moves forward. In Nevada’s pre-1990 homes, dedicated 20-amp circuits for the refrigerator, dishwasher, and disposal are required under Iowa’s adopted NEC 2023 standards. Our team coordinates with licensed electricians to confirm each circuit meets code before appliances are connected.

Step #12

FLOORING & PAINTING

Flooring and final paint wrap up your Nevada kitchen before the walkthrough begins.

We apply paint after cabinets and tile are fully set, so every edge cuts in cleanly against finished surfaces. We use moisture-resistant kitchen paint because standard interior paint breaks down quickly in Nevada homes, where cooking heat and Iowa’s humidity swings create a harsh environment for wall surfaces. Flat or eggshell finishes trap grease and moisture; we use satin or semi-gloss on kitchen walls for exactly that reason.

For flooring, luxury vinyl plank is the standard choice in Nevada kitchens. LVP handles Iowa’s freeze-thaw humidity cycles far better than hardwood, resists moisture under appliances, and holds up under daily use in a working kitchen.

Step #13

FINAL WALKTHROUGH & CLEAN UP

The final walkthrough is where we go through every detail of your Nevada kitchen together before calling the project complete.

Every appliance, plumbing fixture, electrical outlet, light switch, GFCI-protected countertop circuit, cabinet door, and drawer gets tested before we walk the space with you. Iowa’s adopted NEC 2023 code requires GFCI protection on all 125-volt countertop circuits, and we verify every outlet meets that standard before you sign off. If anything is off, we correct it on the spot. We leave the kitchen clean and ready to use. No punch list left for you to chase down later.

Trusted Kitchen Remodeling Contractors in Nevada, IA

Since 2020, Nevada homeowners have trusted Busy Builders to handle kitchen remodels of every scope, from cosmetic refreshes in older Story County homes to full structural overhauls in pre-1980 kitchens with outdated panels and corroded supply lines.

Completed Projects

1155 +

Skilled Workers

40 +

Satisfaction You Can Count On

0 %

FAQs About Kitchen Remodeling
in Nevada, IA

How much does a kitchen remodel cost in Central Iowa?

Kitchen remodeling in Nevada, IA starts at $250 per square foot. Final costs depend on scope, cabinet quality, countertop material, and whether structural or mechanical changes are needed. Costs vary by scope, materials, and complexity.

A cosmetic refresh with cabinet refacing, new countertops, and updated hardware typically runs $10,000 to $25,000. No demo. No structural work. Just a cleaner, more functional kitchen without a full gut.

A mid-range remodel with semi-custom cabinets, quartz countertops, LVP flooring, and layout adjustments runs $45,000 to $70,000. Permits are required when electrical, plumbing, or structural work is part of the scope. Nevada homes built before 1990 often surface a 60 to 100 amp panel at walkthrough. Upgrading to 150 to 200 amps adds $3,000 to $8,000 and two to three weeks. We flag this at assessment. Always budget a 15 to 20 percent contingency on any pre-1990 home in Story County. Learn more about kitchen remodeling services from Busy Builders.

How long does a kitchen remodel take in Central Iowa?

Most Nevada kitchen remodels run 6 to 16 weeks from the initial assessment to final walkthrough. Timelines depend on scope, permit processing time, and what conditions turn up once demo begins.

A cosmetic refresh with no structural or plumbing changes can wrap in 2 to 4 weeks. A mid-range remodel with cabinet replacement, layout changes, and electrical updates typically runs 10 to 16 weeks. Cabinet lead times of 4 to 12 weeks are the most common source of delay, and we order materials concurrent with permitting to keep the schedule tight.

Story County’s older housing stock adds a realistic variable. Corroded galvanized supply lines, unvented exhaust fans, and water-damaged subfloors under appliances are common in Nevada homes.

Do I need a permit to remodel my kitchen in Iowa?

Yes, permits are required for any Nevada kitchen remodel involving structural changes, new electrical circuits, plumbing relocation, HVAC duct modifications, or new gas lines. Iowa adopted the NEC 2023 with state amendments, which requires GFCI protection on all 125-volt countertop outlets and AFCI protection on kitchen branch circuits in new work.

Cosmetic work over existing surfaces, such as cabinet refacing, countertop replacement, or a straight appliance swap, typically does not require a permit. When the scope is unclear, we confirm with the city before the project moves forward.

Busy Builders handles every permit application for projects we manage. You do not need to coordinate with Story County or Nevada city offices on your own.

Should I keep my existing cabinets or replace them?

It depends on the condition of the boxes and whether the layout still fits how your household actually cooks. If the cabinet boxes are structurally solid, the doors close squarely, and the layout works, refacing or repainting is a cost-effective way to refresh the kitchen without the expense of a full replacement.

In Nevada’s older housing stock, that answer changes more often than not. Homes built before 1990 frequently show water-damaged cabinet boxes under the sink or near the dishwasher, misaligned hinges from decades of settling, and layouts that no longer match how the household uses the space. When the boxes are compromised or the layout needs structural changes, full replacement is the better long-term investment.

Can you remove a wall to open up my kitchen?

Yes, and open-concept conversions are one of the most-requested changes in Nevada kitchen remodels. Closed-layout kitchens separated from dining rooms or living areas are common in Story County homes built between the 1960s and 1990s. Before any wall comes down, we determine whether it is load-bearing, meaning a wall that holds up the structure above it, and what runs inside it: plumbing, electrical wiring, or HVAC ducts.

A load-bearing wall requires an engineered header, stamped engineering drawings, and a structural permit submitted to the city. We coordinate all of that. A non-load-bearing wall with no mechanical lines inside it is a simpler scope with a shorter timeline.

How do you keep my home livable during a kitchen remodel?

We seal off the work area before demo begins. Temporary barriers go up between the kitchen and the rest of your home to contain dust and debris. We protect floors and hallways throughout the project, not just at the start.

We clean up at the end of every workday. A Nevada kitchen remodel is an active job site during work hours. After 5 p.m., your home should not feel like one. Countertops, appliances, and living spaces outside the work zone stay accessible throughout the project. We communicate what is happening each day and what is coming next, so there are no surprises about access, noise, or schedule.

Nevada Kitchen Remodeling Guides

Kitchen Remodel Timeline in Iowa: How Long Does It Take in 2026?

July 24, 2026 | By Blake Daniels

Kitchen Remodeling
Nevada, IA