Kitchen Remodeling
Urbandale, IA

Urbandale kitchens have a story most homeowners already know. Closed-off layouts, undersized 60-to-100-amp panels, and exhaust fans venting into attics are common in homes built between 1960 and 1990, and they shape how you use your kitchen every single day.

Busy Builders remodels kitchens across Urbandale, from cosmetic refreshes to full gut remodels that remove walls, upgrade electrical service, and reroute ventilation to code. We handle structural assessments, permits, and every trade in between. If you are ready to open up your floor plan or simply replace what is worn out, we give you a straight scope and honest pricing before any demo begins.

Satisfaction Rate

40 %

Completed Projects

1155 +

Urbandale Kitchen
Remodeling Services

Why Urbandale
Homeowners Choose Us

Since 2020, Busy Builders has completed 1,285+ construction and remodeling projects across Central Iowa, including kitchen remodels throughout Urbandale and the broader Polk County metro.

Urbandale kitchens present challenges that are predictable once you know what to look for. Pre-1990 homes frequently have undersized electrical panels that cannot support modern dedicated circuits for a refrigerator, dishwasher, or range hood. Galvanized supply lines corrode over time and often need full replacement with PEX. Original exhaust fans vent into attics instead of to the exterior, which violates current code and traps moisture.

Our Approach

We give Urbandale homeowners a clear written scope before any demo begins. That includes an honest assessment of what we are likely to find in pre-1990 homes, a recommended 15-to-20% contingency budget for hidden conditions such as water-damaged subfloors or panel undersizing, and pricing that does not shift after you sign.

Why Urbandale Homeowners Choose Us

We want to be the registered contractor that Urbandale homeowners trust with their most-used room. From kitchen remodeling across Central Iowa to structural wall removal in Urbandale’s 1970s and 1980s homes, we bring transparency to every step.

How We Remodel Urbandale Kitchens

Step #1

ASSESSMENT & PLANNING

Before any demo begins, we walk through your Urbandale kitchen and assess what stays and what goes.

We check your electrical panel capacity, plumbing supply lines, exhaust fan routing, subfloor condition, and whether any walls are load-bearing. In pre-1990 Urbandale homes, we routinely find undersized 60 to 100 amp panels that need upgrading before a modern kitchen can function safely. We also look for exhaust fans venting into the attic instead of the exterior, and water-damaged subfloor under original sink locations. These are common in Urbandale’s housing stock and catching them early keeps your budget on track. We build a 15 to 20 percent contingency into every older-home scope for exactly this reason.

Step #2

PERMITS & APPROVALS

Kitchen remodeling in Urbandale requires permits for structural wall removal, electrical upgrades, plumbing relocations, and HVAC modifications. Iowa Building Code is administered through Iowa DIAL under Iowa Administrative Code agency 481, and Polk County processes permits through the city’s building department. Cosmetic updates over existing surfaces typically do not require a permit. Structural changes, new circuits, and any gas line work always do. Urbandale’s older housing stock means electrical permits are especially common , pre-1990 homes frequently run 60-100 amp panels that must be upgraded to 150-200 amps before a modern kitchen can be wired to code. Budget $300-$1,500 for combined building, electrical, and plumbing permits depending on scope.

Step #3

DEMO & HAZARD REMEDIATION

Demo is where Urbandale kitchens reveal what decades of Iowa humidity have been hiding. Pre-1990 homes in Urbandale regularly turn up water-damaged subfloors under the original sink, corroded galvanized supply lines, and asbestos floor tile beneath old linoleum. Asbestos testing and remediation must happen before any flooring is removed. Budget a 15-20% contingency for these discoveries , they are common, not exceptional, in Urbandale’s 1960s-1980s housing stock. Our team assesses known risk factors at the walkthrough so you are not caught off guard mid-project.

Step #4

STRUCTURAL CHANGES & FRAMING

Open-concept conversions are the most-requested structural change in Urbandale kitchen remodels. Closed layouts from 1970s and 1980s construction separate kitchens from dining and living spaces in ways that no longer fit how families cook and gather today. Removing those walls requires a structural assessment before a single nail is pulled.

Load-bearing walls, which are walls that hold up the house above them, require engineered headers, stamped drawings, and a permit before removal. Non-load-bearing walls can come down without the same engineering requirements, but the assessment must happen first. We identify which walls are load-bearing during the design phase, not during demo. That sequence protects your budget and your timeline.

Step #5

PLUMBING ROUGH-IN

Moving the sink, adding a prep sink, or relocating the dishwasher drain all happen while walls and floors are open in your Urbandale kitchen. This is the lowest-cost window to change plumbing locations. Once walls close, those same changes cost significantly more and add days to the schedule.

Many pre-1990 Urbandale homes still have corroded galvanized supply lines under the sink. Our team assesses those lines at the walkthrough, before demo begins. Replacement with PEX tubing is routine and budget-friendly when it happens during rough-in. If your kitchen is in a 1970s or 1980s home, factor plumbing updates into your kitchen remodeling budget from the start.

Step #6

ELECTRICAL ROUGH-IN

Electrical rough-in covers new circuits, outlet placement, under-cabinet lighting wiring, pendant fixture rough-in, exhaust fan wiring, and dedicated appliance circuits for the refrigerator, dishwasher, range, and microwave.

Under Iowa NEC 2023 with state amendments, GFCI protection is required on all 125-volt, 15- and 20-amp countertop outlets. AFCI protection is required on all new kitchen branch circuits. These are not optional upgrades. They are code in every Urbandale kitchen remodel that touches wiring.

Step #7

VENTILATION & RANGE HOOD ROUGH-IN

Range hood ventilation is one of the most frequently mishandled details in Urbandale kitchen remodels.

Iowa has adopted NEC 2023, which requires all exhaust fans and range hoods to vent directly to the exterior. Venting into the attic is a code violation, and it is extremely common in Urbandale homes built before 1990. Attic-vented exhaust traps moisture, promotes mold growth, and fails inspection. Exterior duct routing correction is a routine part of our process on older Urbandale homes. We assess your existing ventilation path at the walkthrough, before a single wall comes down. If rerouting is needed, we factor it into your estimate upfront so there are no surprises mid-project. Learn how we handle kitchen ventilation corrections across Central Iowa.

Step #8

DRYWALL & CEILINGS

Drywall goes up after all mechanical inspections are passed in your Urbandale kitchen.

We hang, tape, mud, and sand every surface to a smooth, paint-ready finish. Moisture-resistant drywall goes on all kitchen walls, especially behind the backsplash area and above the sink. Urbandale sits in Iowa Climate Zone 5A, which means real humidity swings between July and January. Standard drywall breaks down faster in kitchen environments here. We use materials rated for that exposure so your finished walls hold up through years of cooking, steam, and seasonal shifts. If a load-bearing wall was removed earlier in your project, the new ceiling plane gets finished seamlessly at this stage.

Step #9

CABINET INSTALLATION

Cabinets go in after drywall is complete and walls are primed in your Urbandale kitchen.

Upper cabinets are hung first, then base cabinets are set and leveled across the floor. Every cabinet is secured to studs with proper fasteners. Urbandale’s humidity swings cause wood to move seasonally, and we account for that during installation by choosing plywood box construction over particle board wherever possible. Plywood holds fasteners better and resists moisture-related swelling far longer than particle board alternatives. Cabinet lead times currently run 4 to 12 weeks, and with 25% tariffs on imported cabinetry already in place, ordering quickly after your design is finalized protects your budget.

Step #10

COUNTERTOPS, BACKSPLASH & SINK

Countertops are templated only after cabinets are fully installed and leveled. In Urbandale kitchens, quartz is the most common countertop choice. It handles Iowa’s wide humidity swings and freeze-thaw cycles without requiring sealing or ongoing maintenance, making it a practical fit for Central Iowa’s climate.

Quartz and granite slabs are fabricated to the exact template, then installed with proper support and adhesive. Undermount sinks are set during countertop installation so the cutout and seal are precise. Backsplash tile goes in after countertops are secure. If you are working with a mid-range kitchen remodeling scope common in Urbandale’s 1970s and 1980s homes, plan for one to two weeks of fabrication lead time after your cabinets are set and your template is confirmed.

Step #11

APPLIANCES, FIXTURES & HARDWARE

Appliances are delivered and installed after countertops and backsplash work is complete. This sequencing protects finished surfaces from delivery damage. In Urbandale remodels where countertop and tile work can represent 20 percent or more of the total budget, protecting those surfaces matters.

Your refrigerator, range, dishwasher, and disposal are each connected, tested, and confirmed operational before the project advances. Pre-1990 Urbandale homes often require a panel upgrade before final appliance connections are made. Dedicated 20-amp circuits are required under Iowa’s adopted NEC 2023 code for the refrigerator, dishwasher, and disposal.

Step #12

FLOORING & PAINTING

Flooring and final paint bring your Urbandale kitchen together before the walkthrough begins.

We apply paint after cabinets and tile are fully set, so every edge cuts in cleanly against finished surfaces. We use moisture-resistant kitchen paint because standard interior paint breaks down fast in Urbandale homes, where cooking heat and Iowa’s humidity swings put walls through real stress season after season.

For flooring, luxury vinyl plank is the most common choice in Urbandale’s 1960s through 1980s homes. LVP handles the freeze-thaw cycle and summer humidity far better than solid hardwood, and it holds up under heavy kitchen traffic without warping or gapping over time. Costs vary by scope, materials, and complexity.

Step #13

FINAL WALKTHROUGH & CLEAN UP

The final walkthrough is where we review every detail of your Urbandale kitchen together before calling the project complete.

Every appliance, plumbing fixture, electrical outlet, light switch, GFCI-protected countertop circuit, cabinet door, and drawer gets tested before we walk the space with you. Iowa’s 2024 IRC and NEC 2023 amendments require GFCI protection on all 125-volt countertop circuits and AFCI protection on all kitchen branch circuits in new work. We confirm every circuit meets those standards before you sign off. If anything falls short of what we agreed to, we address it on the spot. You do not take ownership of the project until you are satisfied.

Trusted Kitchen Remodeling Contractors in Urbandale, IA

Since 2020, Urbandale homeowners have trusted Busy Builders to handle kitchen remodels of every scope, from cosmetic refreshes in aging ranch homes to full structural overhauls in 1970s and 1980s tract housing throughout the greater Des Moines metro.

Completed Projects

1155 +

Skilled Workers

40 +

99% Satisfaction

0 %

FAQs About Kitchen Remodeling
in Urbandale

How much does a kitchen remodel cost in Central Iowa?

Kitchen remodeling in Urbandale starts at $250 per square foot. Final costs depend on scope, cabinet selection, countertop material, and whether structural or mechanical changes are needed. Costs vary by scope, materials, and complexity.

A cosmetic refresh with cabinet refacing, new countertops, and updated fixtures typically runs $10,000 to $25,000. No structural changes. No demo. Just an updated look on an existing layout. A basic remodel with stock cabinets, quartz countertops, LVP flooring, and new appliances typically runs $30,000 to $45,000.

Mid-range remodels, the most common scope for Urbandale’s 1970s and 1980s homes, run $45,000 to $70,000. That range covers semi-custom cabinets, layout changes, a new lighting plan, and upgraded countertops. Full gut remodels with structural wall removal and custom cabinets run $70,000 to $150,000 or more. Always budget a 15 to 20% contingency. Older Urbandale kitchens regularly surface panel undersizing, corroded galvanized lines, and water-damaged subfloor once demo begins.

How long does a kitchen remodel take in Central Iowa?

Most Urbandale kitchen remodels run 6 to 16 weeks from demo to final walkthrough. Timelines vary based on scope, permit processing time, cabinet lead times, and what conditions show up once demo begins.

A cosmetic refresh with no structural or plumbing changes can wrap in 2 to 4 weeks. A basic remodel with cabinet replacement, new countertops, and electrical updates typically runs 6 to 10 weeks. Mid-range remodels with layout changes and semi-custom cabinets run 10 to 16 weeks. Full gut remodels with structural wall removal can run 14 to 20 weeks.

Cabinet lead time is the most common cause of delays. Most cabinet orders run 4 to 12 weeks. We place the order immediately after design is finalized to protect your timeline.

Do I need a permit to remodel my kitchen in Iowa?

Yes, permits are required for any Urbandale kitchen remodel involving structural changes, electrical modifications, plumbing updates, HVAC duct changes, or new gas lines.

Cosmetic work over existing surfaces, such as countertop replacement, cabinet refacing, new hardware, or an appliance swap, typically does not require a permit. When in doubt, we verify with the city before any work begins.

Urbandale enforces Iowa’s adopted building codes, including NEC 2023. That means GFCI protection is required on all 125-volt, 15- and 20-amp countertop outlets, and AFCI protection is required on all kitchen branch circuits in new work. Dedicated 20-amp circuits are required for the refrigerator, dishwasher, and disposal.

Should I keep my existing cabinets or replace them?

It depends on the condition of the boxes and how much the layout needs to change. If the cabinet boxes are structurally sound, doors close squarely, and the layout still works for how your household cooks and lives, refacing or repainting is a cost-effective option. It updates the look without the cost of a full replacement.

If the boxes show water damage, the hinges no longer align, or the layout needs to change to open up the space, full replacement makes more sense. In Urbandale’s older housing stock, water damage under the sink area is common. We assess the boxes during walkthrough, before any pricing is finalized.

Can you remove a wall to open up my kitchen?

Yes, and open-concept conversions are the most-requested structural change in Urbandale kitchen remodels. Closed-layout kitchens separated from dining rooms or living spaces are common in homes built throughout the 1970s and 1980s, which make up a large share of Urbandale’s housing stock. Before any wall comes down, we identify whether it is load-bearing, meaning a wall that holds up the structure above it, and what runs inside it: plumbing, electrical, or HVAC ducts.

A load-bearing wall requires an engineered header, stamped drawings, and a permit submission before demo begins. A non-load-bearing wall can come down without an engineered header, though a permit is still required if electrical or plumbing runs through it.

How do you keep my home livable during a kitchen remodel?

We seal off the work area to contain dust and debris from the rest of your home. Temporary barriers go up before demo begins, and we protect floors and hallways throughout the project.

We clean up at the end of every workday. Urbandale kitchen remodels are active job sites, but your home should not feel like one after 5 p.m. Countertops, appliances, and living areas outside the work zone stay protected throughout the build.

One thing that comes up often in Urbandale’s older homes: asbestos floor tile under original linoleum. If your kitchen was built before 1980, there is a real chance it exists under your existing floor.

Urbandale Kitchen Remodeling Guides

Kitchen Remodel Timeline in Iowa: How Long Does It Take in 2026?

July 24, 2026 | By Blake Daniels

Kitchen Remodeling
Urbandale, IA